Section 2 - Panelview Plus 1000 Control Center Introduction; General Panel Description; Navigating The Control Panel; Screen Selection - York YB Operation Manual

PanelView Plus 1000 Control Center
PANELVIEW PLUS 1000 CONTROL CENTER INTRODUCTION
FIG. 3 – PANELVIEW PLUS 1000

GENERAL PANEL DESCRIPTION

The Allen-Bradley PanelView Plus 1000 operator
interface is furnished standard on the chiller and provides
the ultimate in effi ciency, automation, monitoring, data
recording and chiller protection. The Control Center
is a factory-mounted, wired and tested control system
for R134a centrifugal chillers. The panel is confi gured
with a color TFT display surrounded by "soft" keys that
are redefi ned based on the screen being displayed. This
makes chiller operation quicker and easier with a single
button revealing a wide array of information on a large,
full-color illustration of the appropriate component.
The TFT display features graphic animated display of
the chiller, chiller subsystems and system parameters,
allowing the presentation of several operating parameters
at once.
During engine startup, operation and shutdown, the
system will display vital information available at any
time. The locations of various chiller parameters are
clearly marked and instructions for specifi c operation
are provided on many of the screens.
10
SECTION 2

NAVIGATING THE CONTROL PANEL

Navigating through the various screens of the operator
interface panel is highly intuitive. Soft keys to the left,
right and bottom of the Display Screen allows the user
to select from the available screen displays and make
setpoint adjustments.
Setpoint values are entered with the keypad at the right of
the operator interface panel. Arrow keys on the keypad
allow the user to page up, page down and move to the
beginning and end of the available screens.

SCREEN SELECTION

Graphical, animated screens provide a means of data
display and service for various system components.
Screens indicate all aspects of operation and sensor data
pertaining to the particular component depicted.
At the top of each main screen is displayed the system
status, present date and time, local or remote control
source and system access level. (See below)
FORM 160.60-O2 (1004)
LD09878
YORK INTERNATIONAL