CABASSE PEARL User Manual page 8

STREAM CONTROL APPLICATION
FIRST USE
Open the Stream Control application and launch the tutorial to discover the main features of
the application.
Swipe left-right to open the window giving access to sources and settings.
Select "parameters" then "see the tutorial" at the bottom of the "settings" page. Here are the
main actions detailed here:
- Navigation in the application
- Selection / configuration of a zone
- Zone Management
- Player options
- Media Playback Menu
- Stereo mode
- Voice control
- Audio Customization
- Favorites
- Services
USE / SYNCHRONIZE WITH A TV SET
THE PEARL / THE PEARL AKOYA / THE PEARL SUB
CONFIGURATION
1- Lay the device next to your TV, or a pair of devices on both sides of the TV
on a solid stand.
2- Leave a space of at least 3 centimeters between the rear wall and the
appliance.
3- Connect it to the TV with one of the 2 available inputs. Favor the SPDIF
coaxial solution:
- SPDIF optical input: Connect the "OPTICAL IN" input to the TV audio output
(TV Audio OUT) with the supplied optical cable or equivalent. Make sure that
the protective caps at the ends of the optical cable are removed.
- The device analog RCA input: if the TV does not have an SPDIF optical
output, connect the "AUX IN" input to the TV's analogue stereo output (RCA
TV Audio out) with an RCA-RCA cable , or to the headphone output of the TV
with a Jack-RCA cord (not supplied).
- THE PEARL AKOYA analog 3.5mm jack input: if the TV does not have an
SPDIF optical output, connect the "AUX IN" input to the TV's analogue stereo
output (RCA TV Audio out) with an RCA-RCA cable and the supplied RCA to
mini-jack adapter, or to the headphone output of the TV with a Jack-mini-
Jack cord (not supplied).
DEACTIVATION OF THE SPEAKERS OF THE TELEVISION
Turn on the TV, open the TV menu, and look for a tab such as Audio, Sound or Speakers. Use
the menu function to switch off the TV speakers. This menu item may for example be labeled
"Speaker On / Off" for speakers on / off. If this function does not exist, bring the TV sound
volume with the TV remote control to the minimum level.
ACTIVATION OF THE OPTICAL OUTPUT OF THE TELEVISION
If there is no sound with an optical connection, set the chosen optical output in the TV menu
if necessary.
OPTIMIZATION OF AV SYNCHRONIZATION
In order to provide a stable stereo reproduction with a WLAN connection, the standard
delay in the firmware of THE PEARL / THE PEAL AKOYA / THE PEARL SUB can be up to 1000
milliseconds. This delay can be divided by 5 or more for AV purpose by selecting the TV
mode instead of the Hi-Fi mode.
14
15