CABASSE PEARL User Manual page 6

WIRED AND NON-WIRED INPUTS
THE PEARL / THE PEARL SUB
ANALOG INPUT
This input can be connected to an
audio source (CD player, MP3 player,
smartphone, TV) equipped with an
analog output RCA or mini-jack type.
Use RCA / RCA cord or minijack / RCA
cord (not included)
USB INPUT
This input is only useful for use in Wi-Fi / Ethernet
mode (paragraphs 4,5,6 below). Connect a USB stick
or hard drive containing audio files to this input
to automatically network them. All files in formats
recognized by the DLNA server included in THE
PEARL are then listed in the Stream Audio Control
application and can be read by all Cabasse Stream
players connected to the same network. The PEARL
USB socket has a 5V - 1A DC power supply for use
with a portable hard drive without external power
supply.
WIRED AND NON-WIRED INPUTS
THE PEARL AKOYA
ANALOG INPUT
This input can be connected to an audio source (CD player, MP3 player, smartphone, TV)
equipped with an analog output RCA or mini-jack type. Use the included RCA / mini-jack
adapter for RCA-RCA cord or minijack / RCA cord (not included), or a mini-jack/mini-jack cord
if the source output is mini-jack type.
Micro-USB INPUT
This input is only useful for use in Wi-Fi / Ethernet mode (paragraphs 4,5,6 below). Connect
a USB stick or hard drive containing audio files to this input to automatically network them.
Use the supplied Micro-USB/USB adpater if needed. All files in formats recognized by the
DLNA server included in THE PEARL are then listed in the Stream Audio Control application
and can be read by all Cabasse Stream players connected to the same network. The PEARL
micro-USB socket has a 5V - 1A DC power supply for use with a portable hard drive without
external power supply.
BLUETOOTH CONNECTION
1. Once the speaker is on, press the "Pairing" button on the back
2. The "Pairing" LED on the back should flash
3. Activate Bluetooth on your mobile
4. Select "THE PEARL XXXX Cabasse" from the list of available devices
5. Once the connection is successful, the LED "Pairing" on the back stops flashing
WIRE CONNECTION (LAN) TO THE ETHERNET NETWORK
The wired Ethernet connection guarantees an optimum
and constant transfer rate in any environment. Use this if
Wi-Fi mode operation shows untimely cuts or stops of
music, signs of a saturated Wi-Fi network, or too much
router-to-stream distance.
Connect an RJ45 cable between THE
PEARL AKOYA / THE PEARL SUB and
Box Internet).
The connection is established when the ETH diode changes
to solid blue. The WIFI connection is then automatically
disabled.
CAUTION: DHCP mode of the router must be enabled.
10
PEARL / THE
your router (or
11