Appendix-3 Panel Operation Time - Sony DL-55W657D Service Manual

APPENDIX-3 Operation Time, Boot Count, Panel Operation Time
[To Bring Up Self Diagnostic(SELF CHECK)]
In standby mode, press buttons on
the remote commander sequentially in rapid succession as shown below:
[Operation Time, Boot Count, Panel Operation Time Screen]
Status Information
Self diagnosis history
Panel Selection
STATUS 1st Tu Infor
LVDS Spectrum(%)
SERIAL NUMBER EDIT
MODEL NAME EDIT
TEST RESET
UART Selection
Tu Data for serv
SDB Service Menu
White Balance
Aging Mode
Default date for HDD recording <[
Tuner detection
LVDS Driver Strength
ATMOS CEC DISABLE
You can check the TV set operation time, boot count and panel operation time in service menu although this model doesn't support self-diagnostics.
After you have completed the repairs, clear the result display to "0".
Clearing the Self Check Diagnostic List
•
Panel operation time :
Exiting the Self-diagnostic screen
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on the TV.
KDL-55W657D
Service Mode
>>
>>
<[ 27_LVB550FHB ]>
>>
<[ 30
8150003
KDL-55W657D
<[ OFF
<[ Factory
>>
>>
>>
<[ Off
On
>>
<[ 4
<[ 0
[</>Set[Home]Exit
Press the Channel 7 and then press the Channel 0 to clean the Panel operation time.
Or in power on , press buttons on
BACK
002 MAIN_POWER
003 AUD_ERR
]>
004 PANEL_POWER ERROR
005 PANEL_I2C_COMM_ERR
006 BACKLIGHT_ERR
000 BE_I2C
]>
000 TU_DEMOD
]>
00000-00003-00000
]>
]>
]>
]>
SELF CHECK
<<
000
000
000
000
000
000
001
[Home] Exit
Panel operation time by hour
Boot count
Total operation time by hour
47