Lorex H871T6D-4BA2 Quick Start Manual page 13

3. Secure the mounting plate using a Philips
head screwdriver and the screws.
4. Match the arrow side of the mounting
bracket to the arrow side of the
mounting plate
5. Insert the four tabs from the mounting
plate into the mounting bracket and push
down. A "click" sound will indicate that
the bracket is locked in (see Figure 2).
Note: To detach the mounting bracket
from the mounting plate, simply push
the bracket up to unlock it.
6. Position the bracket's adjustable screw to the desired
angle. If necessary, loosen the 3 screws on the bottom
for additional adjustment. Tighten when done (see
Figure 3).
7. Fasten the camera to the bracket's adjustable screw.
H871T6D-4BA2-E_QSG_EN_R1.indd 13 H871T6D-4BA2-E_QSG_EN_R1.indd 13
(see Figure 2).
Figure 2
Figure 3
2020-09-01 11:58:12 AM 2020-09-01 11:58:12 AM