Brinkmann 822-0429-0 Owner's Manual page 5

Deck/Wall/Fence
Mounting:
Select a location with full, direct sunlight.
Shady locations will not allow the battery
to charge fully and will reduce the hours of
nighttime light.
Step 1
Mount the bracket to a deck, wall or fence
using the two screws provided.
Step 2
Align the connector to the grooves
on bottom of light head. Turn
counter-clockwise to set in place.
Step 3
Insert light head into bracket. The photocell
light sensor should point away from other
nighttime light sources.
Step 4
Charge in direct sunlight for 10- 12 FULL,
SUNNY DAYS. The light will turn on
automatically at night. Allow at least
10-12 cycles (i.e., 10-12 days and nights
of charging and discharging) for the
battery to charge to its full capacity.
4