Fujitsu LOOX600 User Manual page 68

1 Input any name that will remind you what the contents of these connection
settings are. The name of the service provider is often a good choice.
2 Make the correct settings for your CF card.
3 Tap "Detailed settings".
The detailed settings screen is displayed. There is usually no need to change
anything on the "Port settings" tab or the "TCP/IP" tab.
"Port settings" tab
5 Tap the "Name server" tab and "Use specific server address".
1 Input the numbers specified by your provider. If your provider only gave you one
server address, set it as the primary DNS.
2 Tap .
50
"TCP/IP" tab
2
1