Fujitsu LOOX600 User Manual page 25

3 Power button
This button switches the power for this device On/Off.
Also, if this button is pressed together with the scroll lever, the touch screen
calibration screen is displayed. Tap "Correct touch screen", then following the
instructions on the screen, tap "+" to correct the touch screen. For details on how to
operate the scroll lever, see the scroll lever operation method.
4 Light sensor
This sensor is for switching the brightness of the screen according to how strong
the extra light is.
5 CF card slot (with dummy card)
This slot is where a CF card is set.
6 Built-in speakers
This speaker outputs sounds from the system (for example alarms), recorded
sound, etc.
7 Stereo headphone terminal
You can connect any off-the-shelf headphones (the type with straight 3.5 mm mini
plug) and listen to audio.
8 Strap installation port
Install any off-the-shelf hand strap.
9 SD/MMC card slot
This slot is where an SD/MMC card is set.
10 Start button
This button is equivalent to the
and release this key, the
can use the scroll lever and the cursor button to select and execute applications.
Also, if you press and hold this button about one second (long press), the
application assigned to this button is started. For details on how to assign the
application for this button, see "Application Buttons Settings" .
11 Scroll lever
This is used for scrolling the screen and selecting/executing items.
Also, if the scroll lever is pressed together with the power button, the touch screen
calibration screen is displayed. Tap "Correct touch screen", then following the
instructions on the screen, tap "+" to correct the touch screen. For details on how to
operate the scroll lever, see the scroll lever operation method.
12 Infrared communications port
This is the data output/input port for infrared communications.
13 Reset switch
To reset this device.
key on a computer keyboard. When you press
menu is displayed. With the menu displayed, you
7