Advertisement
SKAARHOJ DEVICE CORES
Ethernet to Serial connection
To communicate via serial (RS-232C) to the Sony SRG-300 camera you need an Ethernet-Serial converter.
We suggest you get a USR-TCP232-306 from USR IOT - https://www.pusr.com/products/ethernet-to-serial-
converters-usr-tcp232-306.html
Below you will find screenshots of how to configure the USR-TCP232-306 converter (found of the web
interface of the USR-TCP232-306). Notice the IP address of the USR-TCP232-306 (Static IP Address) must
match the IP settings of the SRG-300 Device Core.
In the settings below the Baud Rate is set to 9600 and Serial Type to RS232. The camera must match these
settings.
Actions
An excerpt of the actions in the Device Core
4
Advertisement
