Kenwood TK-3207 Service Manual page 6

• Electronic interface may cause a failure in data transfer
during Wireless Clone, such as when waveforms or
electromagnetics are being performed at the workbench.
• Clone mode can be used ONLY by the authorized service
personnel.
• The Clone mode setting must be configured as "Disable"
before being delivered to the end-user.
• To clone, replace the antenna from both the source
transceiver and the target transceiver with a dummy
load.
• The transmit output power is automatically set to Low
in Clone mode.
Clone Frequency Table
Type C5
Operating
Clone Frequency
370~390
Frequency (MHz)
Table
1 370.000
2 371.000
3 372.000
4 373.000
5 374.000
6 375.000
7 376.000
8 377.000
9 378.000
10 379.000
11 380.000
12 381.000
13 382.000
14 383.000
15 384.000
16 385.000
17 386.000
18 387.000
19 388.000
20 389.000
REALIGNMENT /
C6
350~370
350.000
351.000
352.000
353.000
354.000
355.000
356.000
357.000
358.000
359.000
360.000
361.000
362.000
363.000
364.000
365.000
366.000
367.000
368.000
369.000
模式组合
• 在无线复制的数据传输过程中， 例如在工作台产生的电波或
电磁干扰有可能引起传输失败。
• 复制模式可以仅被批准的服务人员使用。
• 在交付给最终用户之前，复制模式设置必须被设置为"无
效" 。
• 为了复制，将模拟负载代替主对讲机和子对讲机的天线。
• 在复制模式，发射功率自动设定为低。
复制频率表
类型 C5
操作频率
(MHz)
370~390
复制频率表
1 370.000
2 371.000
3 372.000
4 373.000
5 374.000
6 375.000
7 376.000
8 377.000
9 378.000
10 379.000
11 380.000
12 381.000
13 382.000
14 383.000
15 384.000
16 385.000
17 386.000
18 387.000
19 388.000
20 389.000
TK-3207
C6
350~370
350.000
351.000
352.000
353.000
354.000
355.000
356.000
357.000
358.000
359.000
360.000
361.000
362.000
363.000
364.000
365.000
366.000
367.000
368.000
369.000
5