Ec Declaration Of Conformity - McCulloch UNIVERSAL MTO002 Instruction Manual

WARNING:
steps after each use:
S Allow attachment and gearbox to cool be-
fore storing or transporting.
S Position attachment so that any sharp ob-
ject cannot accidentally cause injury.
S Store the attachment in a high, cool, dry,
well ventilated indoor area out of reach of
children.
SEASONAL STORAGE
Prepare attachment for storage at end of sea-
son or if it will not be used for 30 days or more.
If your cultivator attachment is to be stored for
a period of time:

EC DECLARATION OF CONFORMITY

Issuer's name: Husqvarna AB, SE-561 82 Huskvarna, Sweden (Tel: +46-36-146500) Husqvarna AB
claims sole responsibility for the cultivator attachment platform(s) UCUA representing model(s)
Universal MTO002 from 2014 serial numbers and on-wards. The platform number and model number
are clearly stated in plain text on the type plate along with the year with subsequent serial numbers.
The object of the declaration described above is in conformity with the requirements of the
Council's Directives:
2006/42/EC "relating to machinery" 17 May 2006
2000/14/EC "relating to noise emissions in the environment" 08 May 2000
In accordance with Annex V, the declared sound values are:
The measured sound power is 108 dB and the guaranteed sound power is 114 dB
The following standards have been applied:
EN ISO 12100:2010, EN 15503:2009
TÜV Rheinland N.A. has carried out a voluntary examination on behalf of Husqvarna AB, providing
AK72140364 - Certificate of Conformity and is approved for the following platforms/models:
LT28CSHV, LT28CSJN, LT28CSMC, LT28CSPR, 4S28CSPR, AT26CSMC, A05328CSHV
This certificate is applicable to all manufacturing locations and Countries of Origin, as stated on the
product.
The supplied cultivator attachment conforms to the example that underwent examination.
Signed on behalf of: Husqvarna AB, Huskvarna, Sweden, 2013-12-01
Ronnie E. Goldman
Director of Engineering
(Authorized representative and responsible for technical documentation)
01-EN
STORAGE
Perform the following
S Clean the entire attachment.
S Inspect the tine cover area and clean any dirt
or debris that has collected. Inspect the tines;
replace tines that are bent, warped, cracked,
broken or damaged in any other way.
S Lightly oil external metal surfaces.
S Check entire attachment for loose screws
or nuts. Replace any damaged, worn or
broken parts.
S Follow storage instructions in powerhead
instruction manual for proper storage in-
formation and seasonal use.
7