Setup 1
1
The default settings are marked with
LCD Backlight
Selects the brightness of the LCD backlight.
Bright
Normal
• You can change the setting by pressing v (DISP) on the control button longer.
• Selecting [Bright] uses up the battery charge faster.
Beep
Selects the sound produced when you operate the camera.
Shutter
On
Off
Language
Selects the language to be used to display the menu items, warnings, and messages.
Initialize
Initializes the setting to the default setting. Even if you execute this function, the images
stored in the internal memory are retained.
1 Select [Initialize] with v/V/b/B on the control button, then press B.
2 Select [OK] with v, then press z.
The message "Initialize all settings" appears.
3 Select [OK] with v, then press z.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step 3, then press z.
• Make sure that the power is not disconnected during resetting.
52
For details on the operation 1 page 47
.
Brightens.
Turns on the shutter sound when you press PHOTO.
Turns on the beep/shutter sound when you press the control
button, PHOTO or MOVIE button.
Turns off the beep/shutter sound.