NAPCO 5831 Operator's Manual page 14

MAINTENANCE OF STAINLESS STEEL (CONT.)
The following chart is provided as a guide to cleaning the interior surface of your vacuum oven.
Routine Cleaning
Smears and Fingerprints
Stubborn spots and stains,
baked-on splatter, and
other light discolorations
EFFECTIVE METHODS FOR CLEANING STAINLESS STEEL
Cleaning Agent *
Soap, or ammonia, or
detergent and water.
Arcal 20, Lac-O-Nu, Lumin
Wash, O'Cedar Cream Polish,
Stainless Shine, or
Wind-O-Shine.
Allchem Concentrated
Cleaner or Lusteel.
Samae, or Cameo Copper
Cleaner.
Cooper's Stainless Steel
Cleaner, or Revere Stainless
Steel Cleaner.
Liquid NuSteel.
Paste NuSteel, DuBois Temp,
or Aerogroom.
Household cleansers, such as
Old Dutch, Lighthouse,
Sunbrite, Wyandotte, Bab-O,
Gold Dust, Sapolio, Bon Ami,
Ajax, Comet, Off, or Stainless
Steel Super Shine.
Grade F Italian pumice, Steel
Bright, Lumin Cleaner, Zud,
Restoro, Sta-Clean, or
Highlite.
Penny-Brite or Copper-Brite.
BuBois Stainless Steel Polish.
9
Method of Application**
Sponge with cloth, then rinse
with clear water and wipe dry.
Rub with cloth as directed on
the package.
Apply with damp sponge or
cloth.
Rub with damp cloth.
Rub with damp sponge or
cloth.
Rub with dry cloth. Use small
amount of cleaner.
Rub with dry cloth using a
small amount of cleaner.
Rub with a damp cloth. May
contain chlorine bleaches.
Rinse thoroughly after use.
Rub with a damp cloth.
Rub with a dry cloth using a
small amount of cleaner.
No rubbing - just spray lightly
on dry surface and wipe off.
Effect on Finish
Satisfactory for use on all
finishes.
Satisfactory for use on all
finishes. Provides barrier film
to minimize prints.
Satisfactory for use on all
finishes.
Satisfactory for use on all
finishes if rubbing is light.
Use in direction of polish lines
on No. 4 (polished) finish. Use
light pressure on No. 2 (mill)
and Nos. 7 and 8 (polished)
finishes.
Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished )
finishes.
Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished)
finishes.
Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished)
finishes.
Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished)
finishes.
Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished)
finishes.
Forms thin, hard satin-sheen
finish that resists grease
stains, water marks,
fingerprints, etc.