Bosch BSG 81266CH Instructions For Use Manual page 29

Changing the filter
Replacing the dust bag
If the dust bag change indicator lights up brightly
and uniformly when the nozzle is lifted from the
floor and the vacuum is on its highest setting, you
should change the dust bag, even if it is not yet
full.
In this case it is essential to change the dust bag
due to the type of material it contains.
Turn the dust compartment locking lever in the
direction of the arrow to open the dust
compartment cover.
Seal the dust bag by pulling the locking tab and then
remove it.
Place a new dust bag in the holder and close the
dust bag compartment cover.
Caution: The dust bag compartment cover will
!
only close when the dust bag, textile filter or
dust collector has been inserted.
If the dust bag change indicator continues to
light up after the dust bag has been changed,
please check whether the nozzle, pipe or
vacuum hose are obstructed.
en
29