Advertisement
Quick Links
Specifications
200UPR Receiver
Frequency Range
UHF 63-Channel Selectable (793.750 – 805.875MHz)
Type of Reception
2 Channel Receiver
Oscillator
PLL Synthesized
RF Squelch Level
13dBµV
Frequency Response
50Hz – 15kHz
S/N Ratio
>70dB "A" Weighted
Audio Distortion
<1% @ 1kHz
Operating Temp.
0°C – 45°C (32°F – 113°F)
-64dBm @ 600 Ω - 3.5mm Mini-Jack
MIC Out
Power Requirement
6 – 1.5V "AA" Alkaline Batteries or 12VDC @ 200mA - 6 – 8 Hours
Dimensions
105W x 105H x 35D mm (4.13W x 4.13H x 1.38D inches)
Weight
Approx. 490g Including Battery (17.28oz)
10BT Transmitter
Frequency Range
UHF 63-Channel Selectable (793.750 – 805.875MHz)
Oscillator
PLL Synthesized
RF Power
10mW (30mW Max.)
Frequency Response
50Hz – 15kHz
Max. Deviation
±75kHz @ 1kHz Modulation, MIC Input –11dBm
S/N Ratio
>70dB "A" Weighted
Audio Distortion
<1% @ 1kHz
MIC Sensitivity
±40kHz @ -22dBm MIC Input (0dBm+0.775V) - 3.5mm Mini Jack
Operating Temp.
0°C – 50°C (32°F – 122°F)
Power Requirement
1 – 9V Alkaline Battery - 6 – 8 Hour
Dimensions
62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches)
Weight
Approx. 120g Including Battery (4.23oz)
10HT Transmitter
Frequency Range
UHF 63-Channel Selectable (793.750 – 805.875MHz)
Oscillator
PLL Synthesized
RF Power
10mW (30mW Max.)
Frequency Response
50Hz – 12kHz
Max. Deviation
±75kHz @ 1kHz Modulation, MIC Input –11dBm
S/N Ratio
>70dB "A" Weighted
Audio Distortion
<1% @ 1kHz
MIC Element
ECM
MIC Sensitivity
±5kHz @ -46dBm (0dBm+0.775V)
Operating Temp.
0°C – 50°C (32°F – 122°F)
Power Requirement
2 – 1.5V "AA" Alkaline Batteries – 8-10 Hours
Dimensions
230H x Ø 44D mm (9.05H x 1.73D inches)
Weight
Approx. 130g Including Batteries (4.58oz)
51XT Transmitter
Frequency Range
UHF 63-Channel Selectable (793.750 – 805.875MHz)
Antenna
Internal Antenna
Pre-emphasis
50 ms
MAX Input Level
-7dBm
Microphone Unit
Dynamic Microphones
RF Output Power
15mW (50mW MAX)
Input Impedance
6K
Audio Adj Range
-63dBm ~ -18dBm
Battery
1-9V – 6-8 Hours
Dimensions
40 x 40 x 99(L) mm (1.57 x 1.57 x3.9 inches)
Weight
152g without battery (5.4oz)
Due to constant improvements, specifications are subject to change without notice.
Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010
vox - 516.328.7500 • fax - 516.328.7506 • email - azdenus@azdencorp.com
© 2005 Azden Corporation
Printed in USA
200UPR RECEIVER
200ULT • 200ULH • 200ULX SYSTEMS
User's Guide
P1050-01
200UPR • 10BT • 10HT • 51XT
ON-CAMERA
UHF WIRELESS MICROPHONE SYSTEM
Advertisement
Related Manuals for Azden 10BT
Summary of Contents for Azden 10BT
-
Page 1: Specifications
152g without battery (5.4oz) Due to constant improvements, specifications are subject to change without notice. Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010 vox - 516.328.7500 • fax - 516.328.7506 • email - azdenus@azdencorp.com ©... - Page 2 Important information Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license depends largely on the user’s classification, application and frequency. Contact the appropriate agency (FCC in the US) for further information.
- Page 3 If there is not enough volume raise the gain on the transmitter. Thank you for purchasing Azden’s 200UPR or 200ULT/ULH/ULX wireless system, which consists of the 200UPR receiver, 10BT transmitter and EX-503 lapel microphone, the 10HT transmitter or the 51XT Plug-in transmitter. This equipment is designed primarily for video cameras but is usable with most electronic components having a microphone level input.
- Page 4 When the units are turned “On” the frequency is locked and will not change. When operating multiple systems all receivers and transmitters must be on the same group. Example: 4 systems operating simultaneously. System #1...