Rear Suspension; Output Terminal - Suzuki Burgman Series Owner's Manual

REAR SUSPENSION

SPRING ADJUSTMENT
To adjust the spring pre-load, turn
the adjuster clockwise or counter-
clockwise to the desired position.
Position 1 provides the softest
spring pre-load and position 5
provides the stiffest. This motor-
cycle is delivered from the factory
with its adjuster set on position 2.
 WARNING
Unequal suspension adjust-
ment can cause poor handling
and instability.
Adjust the right and left shock
absorbers to the same set-
tings.

OUTPUT TERMINAL

AN650Z has an output terminal
for attaching 12V electrical acces-
sories. Total electrical accessory
wattage should be less than 36W.
Check electrical accessory volt-
age and wattage before attaching
accessories to the output termi-
nal.
NOTICE
Using improper
accessories can damage your
motorcycle. Exceeding 36W or
using other than a 12V acces-
sory can seriously damage the
electrical system and acces-
sory.
Check voltage and wattage
before connecting electrical
accessories.
NOTE: The trunk lid may not latch
closed if a long type plug is
inserted into the output terminal.
3-34
electrical