Receive Your Own Copy; Receive Notification Of Sent E-Mail - Axis 7000 User Manual

Network document servers

Hide thumbs Also See for 7000:

Table of Contents

AXIS 70U/7000 User's Guide

Notes:

This does not apply when user authentication is enabled as the sender is automatically set to the

logged in user and can not be changed.

Administrators are referred to Specifying System Settings, on page 18 for information on how to

configure normal user privileges.

Receive your Own Copy

If the Administrator has enabled the Cc-feature you will receive a copy of the

e-mail if:

• You are logged in to the AXIS 70U/7000 and have received a valid

e-mail address from the authentication server.

- or -

• You have entered your e-mail address in the sent by: prompt.

If none of the above, the copy will be sent to the default Cc-address entered by

the administrator.

The Administrator can enable one or both notification parameters:

• Notify sender when a message has been delivered (requires that your

mail server supports extended SMTP and Delivery Notification Status).

• Notify sender when a message has been read (requires that the

recipient's e-mail client supports Message Disposition Notification. The

recipient can also discard the request without notifying the sender).

For security reasons this feature is only enabled when the user is logged in

and the AXIS 70U/7000 has received a valid e-mail address from the

authentication server.

Using the AXIS 70U/7000

Table of Contents

70u