Before You Start - Axis 5400+ User Manual

4

Before You Start

This guide applies to the AXIS 5400+/AXIS 5600+ with firmware version 6.43 and higher.
The following operating systems are covered in this guide:
Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP, Windows Server
•
2003
Mac OS X
•
UNIX/Linux
•
Note:
Installation instructions in this book cover the above operating systems over TCP/IP.
See the AXIS 5400+/AXIS 5600+ User's Manual, located on www.axis.com for installation instructions
regarding
Windows over NetBIOS/NetBEUI
•
NetWare over IPX/SPX and TCP/IP
•
• MacOS over Appletalk
The instructions in this guide are based on the settings found in a new and unconfigured AXIS
5400+/AXIS 5600+.
To reload the default parameters, you can perform a Factory Default, which will restore most
settings to their default values. See Using the Test Button on page 26 for instructions.
AXIS 5400+/AXIS 5600+ User's Guide