Pan/Tilt/Zoom Controls; Center Mode; Emulated Joystick Mode; Area Zoom - Axis 295 User Manual

Axis media control

Hide thumbs Also See for 295:

Table of Contents

Pan/Tilt/Zoom Controls

The default setting for PTZ is the Center Mode. When in Center Mode, click on any part of the

image other than its exact center and the camera will move so that the point you clicked on

becomes the new center of the image.

If you select Emulate Joystick Mode, the camera moves in the direction of the mouse pointer. If

you click and hold down on the left mouse button, and then point your cursor at the lower left

hand corner of the image, the camera continues to move left and down until you release the

mouse button.

Area Zoom allows you to zoom in on a specific area of the video stream. Put the cursor where you

want the center of the area you want to zoom in on, and then drag the cursor out as far as the size of

the area you want to zoom in on. Note that AMC is dependent on the camera's zoom calibration.

AMC

Table of Contents

Amc