Using Automatic Needle Threader - Singer SM024 Instruction Manual

KNOWING YOUR SEWING MACHINE

Using automatic needle threader

Raise the needle to its highest position by rotating the hand wheel towards you.
1. Hook thread to thread guide, as illustrated.
2. Pull down the lever while holding the end of thread.
3. Rotate the lever to the rear of the machine until the hook pin comes through the eye of the needle.
4. Guide thread into hook pin, in front of the needle, and lightly pull the thread upward.
5. Return the lever and needle will be threaded automatically, forming a small loop.
6. Release the lever and pull thread away from you until the thread tail is completely threaded.
NOTE: For smooth threading it is recommended you select straight stitching
when using the needle threader.
NOTE: Automatic needle threader is only applicable for all-purpose presser foot. Automatic needle
threader cannot be used for twin needles.
8