Bridge Mode - Zte MC801A Quick Start Manual

Bridge Mode

Your device supports the bridge mode and you can use this service from
your service provider to access the Internet.
1. Connect your device to the Internet first.
2. Log in to the 5G CPE configuration web page.
3. Change the operation mode to Bridge Mode.
4. C onnect the computer or other cable-connected client to the LAN
port1 and the client can obtain the IP address from the WAN DHCP
host and connect to the Internet directly.
NOTE:
The cable-connected client connected to the LAN port2 or the Wi-Fi
connected clients cannot visit the Internet, but they can communicate
with each other. If you want to change the operation mode, you can use
this client to log in to the configuration page to change the mode.
8