Action Buttons - Axis M3203 User Manual

AXIS M32 Series
Viewer Settings
Select the Show viewer toolbar box option to enable the AXIS Media Control (AMC) or the QuickTime viewer toolbar under
the video image in your browser.
The administrator can disable the installation of the H.264 decoder included with AMC. This is used to prevent the
installation of unlicensed copies. Further decoder licenses can be purchased from your Axis dealer.
The Show crosshair in PTZ joystick mode option shows a cross that indicates the center of the image when viewing the video
stream in PTZ joystick mode.
The Use PTZ joystick mode as default option sets the PTZ mode to joystick. The mode can be changed temporarily on the PTZ
Control Panel, but will default to joystick if this is selected.
Select the Enable recording button option to enable recording from the Live View page.

Action Buttons

The Show manual trigger button can be used to manually trigger and stop an event from the Live View page. See Event
Configuration, on page 21.
Check the Show snapshot button to save a snapshot from the video stream. This button is mainly intended for use with
browsers other than Internet Explorer, or when not using AXIS Media Control (AMC) to view the video stream. AMC for
Internet Explorer provides its own snapshot button.
User Defined Links
User defined links can be CGI links or web links. Once
configured, the link(s) appear on the Live View page.
To set up a web link, select the Use as web link radio
button, enter a descriptive name and enter the URL in the
provided field. Click Save and the link appears in the Live
View page.
User defined CGI links can be used to issue VAPIX API
requests.
For more information on the VAPIX Application
Programming Interface (API), see the Support/Network
Video/Developer pages on the Axis Web site at
http://www.axis.com
Please use the online help files for more information.
user defined link
18