Action Buttons; Default Viewer - Axis M1054 User Manual

Default Viewer

From the drop-down lists, select the default method for viewing video images for your browser. The camera attempts to show
the video images in the selected video format and viewer. If this is not possible, the camera overrides the settings and selects
the best available combination.
Browser Viewer
AMC
QuickTime
Java applet
Windows
Internet Explorer
Still image
Server Push
QuickTime
Other browsers
Java applet
Still image
Viewer Settings
Check the Show viewer toolbar box to display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the video
image in your browser.
The administrator can disable the installation of the H.264, MPEG-4, and AAC (AXIS M1031-W/AXIS M1054) decoders
included with AMC. This is used to prevent the installation of unlicensed copies. Further decoder licenses can be purchased
from your Axis dealer.
The Show crosshair in PTZ joystick mode shows up a cross that indicates the center of the image when viewing the video
stream in PTZ joystick mode (AXIS M1054 Only).
You can set the PTZ mode to joystick. Check the Use PTZ joystick mode as default option. (AXIS M1054 Only).
Check the Enable recording button to enable recording from the Live View page.

Action Buttons

The Show manual trigger button can be used to manually trigger and stop an event from the Live View page.
Check the Show snapshot button to save a snapshot from the video stream. This button is mainly intended for use with
browsers other than Internet Explorer, or when not using AXIS Media Control (AMC) to view the video stream. AMC for
Internet Explorer provides its own snapshot button.
Play audio clip enabled allows the user to pick an audio clip from a drop-down list and play it from the camera. See Audio
Clips (AXIS M1031-W/AXIS M1054), on page 21.
Description
Recommended viewer in Windows Internet Explorer (H.264/MPEG-4/Motion JPEG).
H.264 and MPEG-4.
A slower imaging alternative to AMC. Requires one of the following installed on the
client:
• JVM (J2SE) 1.4.2 or higher
• JRE (J2SE) 5.0 or higher
Displays still images only. Hit the Refresh button in your browser to view a new
image.
Recommended viewer for other browsers (Motion JPEG).
MPEG-4 and H.264.
A slower imaging alternative to Server Push (Motion JPEG only).
Displays still images only. Hit the Refresh button in your browser to view a new
image.
23
AXIS M10 Series - Video & Audio Settings