The Live View Page - Axis M3113-VE Nocap User Manual

The Live View page

How you customize the Live View page determines which buttons are visible. Not all the buttons described below will show
up unless configured to do so.
General controls
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream pro-
file on the Live View page. Stream profiles are configured under Video > Stream Profiles.
The Action buttons can trigger an event directly from the Live View page. These are enabled under
Setup > Live View Config > Layout.
The Snapshot button saves a snapshot of the video image on display. Right-click on the video image
to save it in JPEG format on your computer. This button is primarily intended for use when the AMC
viewer toolbar is not available.
AXIS Media Control toolbar
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only. See AXIS Media Control (AMC),
on page 11 for more information. AMC displays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the image is saved can be
specified using the AXIS Media Control (AMC).
Click the View full screen button and the video image will fill the entire screen. Press Esc (Escape) on the
computer keyboard to cancel full screen view.
The Record button is used to record the current video stream. The location where the recording is saved can
be specified using the AXIS Media Control toolbar.
The Set center mode button helps you control the camera view by clicking in the image.
Note: The click-in-image function will not be available when PTZ control queue is enabled and Java applet
has been selected as default viewer under Live View Layout.
AXIS M31-VE Series - Accessing the Camera
9