Stream Profiles - Axis M3113-VE Nocap User Manual

H.264
GOV Settings
The GOV structure describes the composition of the video stream and setting the GOV-length to a higher value saves
considerably on bandwidth but may have an adverse effect on image quality.
Bit Rate Control
The bit rate can be set as Variable Bit Rate (VBR) or Constant Bit Rate (CBR).
VBR adjusts the bit rate according to the image complexity, using more bandwidth for increased activity in the image, and less
for lower activity in the monitored area.
CBR allows you to set a fixed Target bit rate that consumes a predictable amount of bandwidth. As the bit rate would usually
need to increase for increased image activity, but in this case cannot, the frame rate and image quality are affected
negatively. To partly compensate for this, it is possible to prioritize either the frame rate or the image quality whenever the bit
rate needs to be increased. Not setting a priority means the frame rate and image quality are equally affected.
Note: To determine a reasonable bit rate, go to Setup > Video > Video Stream > Image, check the Include text checkbox
and enter the code #b in the Include text: field. The current bit rate is displayed as a text overlay on the Live View page.
To view the image stream while configuring the GOV settings and Bit rate control, select Open... under Preview.
MJPEG
Sometimes the image size is large due to low light or complex scenery. Adjusting the Maximum frame size helps to control
the bandwidth and storage used by the Motion JPEG video stream in these situations. An Unlimited frame size provides
consistently good image quality at the expense of increased bandwidth and storage usage during low light. Limiting the frame
size optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage
usage, the maximum frame size should be set to an optimal value.
See Preview, on page 12.

Stream Profiles

There are four pre-programmed stream profiles available for quick set-up. These settings can be adjusted and new customized
profiles can be created. Each profile has a descriptive name, describing its use and purpose. The profiles can be accessed from
the Live View page.
To add a new stream profile, click Add to bring up the Stream Profile Settings dialog.
•
• Enter a descriptive name for your profile.
Choose the form of Video encoding you wish to use from the drop-down list:
•
H.264 - Also known as MPEG-4 Part 10. This is the new generation compression standard for digital video. This
function offers higher video resolution than Motion JPEG at the same bit rate and bandwidth, or the same quality
video at a lower bit rate.
Motion JPEG - Delivers a high quality video stream, from which individual images can be extracted and saved.
Copy an existing stream profile to your system and rename the copy
•
• Modify an existing stream profile based on the light situation and motion to be captured by your camera.
Highlight the stream profile (custom created profiles only) you wish to remove, then click Remove to remove it from
•
the list.
AXIS M31-VE Series - Video
13