BMW F 800 R 2013 Rider's Manual page 92

Roll the front wheel forward to
8
remove.
90
Remove spacing bushing 3
z
from the left-hand side of the
wheel hub.
Installing front wheel
Malfunctions are possible
when the ABS system in-
tervenes if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS system
at the start of this chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Slip spacing bushing 3 onto
the left-hand side of the wheel
hub.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle 2 and
tighten to specified torque.
Quick-release axle in fork
leg
50 Nm
Tighten axle clamping screws 1
to the specified tightening
torque.