BMW F 800 R 2013 Rider's Manual page 82

8
80
Brake-pad wear limit,
front
min 1.0 mm (Friction pad
z
only, without backing
plate. The wear indicators
(grooves) must be clearly
visible.)
If the wear indicating marks are
no longer clearly visible:
Brake pads worn past the
minimum permissible thick-
ness can cause a reduction in
braking efficiency and under
certain circumstances they can
cause damage to the brake sys-
tem.
In order to ensure the dependab-
ility of the brake system, do not
permit the brake pads to wear
past the minimum permissible
thickness.
Have the brake pads replaced
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Check rear brake pad
thickness
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Visually inspect the brake pads
to ascertain their thickness.
Viewing direction: from the rear
toward brake caliper 1.