Balanced Stitch - Bernina Overlocker L 890 Workbook

Hide thumbs Also See for Overlocker L 890:

Table of Contents

My BERNINA

BALANCED STITCH

Firm fabric, 10" x 10"

80/12 ELX705

4 Spools Serger Thread (B, R, G, Y)

4-Thread Overlock Stitch #1)

C11

B E R N I N A O V E R L O C K E R W O R K B O O K

Thread the overlocker for 4-thread overlock stitch

using the colors to match the color-coded threading

path on the machine. Select Stitch #1 and make all the

recommended manual setting adjustments.

Fold the fabric in half lengthwise 5" x 10"

Sew the 4-thread overlock with preset default setting

along the folded edge—trimming off the fold. Stitch

off the edge of the fabric and continue until the thread

chain is long enough to be cut in the thread cutter at

the side of the machine (6"-8" approximately).

Examine the stitch formation and label the sample with

the machine settings on the fabric.

Launch the Stitch Optimizer and determine if any

corrective measures are needed.

Left Needle

Right Needle

Upper Looper

Lower Looper

Table of Contents