Applications; Tapping Signal From A (Bass)Guitar; Converting The Output Of A Keyboard / Dj-Mixer / Headphone Plug - Behringer ULTRA-DI PRO DI4000 User Manual

Hide thumbs Also See for ULTRA-DI PRO DI4000:

Table of Contents

ULTRA-DI PRO DI4000

2. APPLICATIONS

Fig. 2.1: Guitar ß DI box ß Guitar Amp/Mixer

This figure shows the standard application of any Direct Inject box. The signal to the amplifier is unaffected, it

is just tapped off to be routed to the microphone input of the mixer. Especially bass guitars benefit from this

application. It is difficult to find a microphone which handles high level low frequencies well and with a linear

frequency response. Using the ULTRA-DI PRO will give you clean and crisp sound. Connect the

ULTRA-DI PRO after any effects devices, so that their effect will be heard over the PA system or on the

recording.

Fig. 2.2: DJ-mixer ß 2 x DI box ß Mixer

This configuration can be used with a keyboard, DJ-mixer, headphone output, drum kit or any (stereo or mono)

line source. In all cases where you want to run long lines, for instance to the FOH (Front Of House) desk. The

signal can be linked through to another amplifier, if the keyboard player/ DJ/etc. wants to have a monitor

connected independent of the foldback mix. The ULTRA-DI PRO acts as both a ground isolator and an

unbalanced to balanced converter.

2. APPLICATIONS

Table of Contents