Brake-Shift Interlock; Park Brake - Foot Pedal - Winnebago INTENT Manual

Mirror Heat Switch
(Located on driver side trim panel)
-Typical View
Mirror Arm/Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
Mirror Head Pivot Lock
• Loosen the three (3) Allen head set
screws to pivot mirror head.
• Torque 75-100 in./lbs.
NOTE: Set screws may be located on the
opposite side of the mirror arm.
Passenger side mirror is similar.
DRIVING YOUR MOTORHOME

BRAKE-SHIFT INTERLOCK

®
Ford Chassis
The Brake-Shift Interlock is a safety feature
that prevents the shift lever from being moved
from the Park position unless the ignition is ON
and the service brake pedal is pressed.
NOTE: If the brake light fuse is blown, the
interlock feature will not work properly
and an alternate method must be used.
See the chassis manual provided in your
InfoCase for detailed instructions on
what to do in this situation.
PARK BRAKE – FOOT PEDAL
®
Ford Chassis
The park brake foot pedal and release lever are
located beneath the left side of the dash.
Step the pedal down fully to apply and pull the
brake release lever to disengage.
SECTION 3 -
3-5