Table of Contents
Advertisement
O
PERATION
Strobe
To set the strobe mode of the SlimPAR Pro Pix, follow the instructions below:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select S.001–100:
•
S.000 – Solid on
•
S.001–S.099 – Strobe, slow to fast
•
S.100 – Sound strobe
4.
Press <ENTER>.
IRC-6 Infrared Remote Control
The SlimPAR Pro Pix is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR
mode, follow the instructions below:
1.
Press <MENU> repeatedly until SET shows on the display.
2.
Press <ENTER>.
3.
The IR option will be displayed. Press <ENTER>.
4.
Press <UP> or <DOWN> to select On (turns the infrared function on) or oFF (turns the infrared
function off).
5.
Press <ENTER>.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
To adjust the speed of the automatic program:
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
To adjust sound sensitivity in Sound-Active mode:
Manual Color Control
To choose a specific color with the IRC-6:
To manually control the color percentage:
To black out the lights:
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK OUT>.
You may have inadvertently activated Black Out.
SlimPAR Pro Pix User Manual Rev. 1
1.
Press <AUTO> on the IRC-6.
2.
Press <+> or <–> to choose between the different auto programs
1.
Press <SPEED> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the speed of the program.
1.
Press <SOUND> on the IRC-6.
2.
Press <+> or <–> to choose between the different Sound-Active programs.
1.
Press <SENSITIVITY> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the sound sensitivity.
1.
Press <MANUAL> on the IRC-6.
2.
Press any number between <0>~<9> to choose your color.
1.
Press <MANUAL> on the IRC-6.
2.
Press <R> (red), <G> (green), <B> (blue), <A> (amber), <W> (white), or
<UV> to choose the color.
3.
Press <+> or <–> to increase or decrease the percentage of each color.
1.
Press <BLACK OUT> on the IRC-6.
Page 15 of 20
Advertisement
Table of Contents
