Parts List; Assembly; Optional Parts - Brinkmann 815-3500 Owner's Manual

READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY
FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-527-0717.
An adjustable wrench is needed to
assemble this fryer.

PARTS LIST:

1 Owner's Manual
1 Fryer Stand
1 Burner Assembly
1 Hose & Regulator with Safety Tag
1 Heat Shield
1 Match Holder
1 Air Shutter
1 Spring

OPTIONAL PARTS:

(depending on your model)
1 Boiling Pot and Lid
1 Boiling Pot with Spigot and Lid
1 Turkey Stand and Hanger
1 Deep Fry Thermometer
1 7" Strainer Basket
1 14" Strainer Basket
1 10 qt. Pan and Basket
1 Marinade Injector
Turkey Fryer Gas Cooker
ASSEMBLY INSTRUCTIONS
BEFORE ASSEMBLING OR OPERATING YOUR FRYER.
Inspect contents of the box to ensure all parts are included and undamaged.
(Proof of purchase will be required.)
Step 1
Insert male fitting through spring and air shutter. Keep
narrow end of spring facing toward fitting. Attach burner
to male fitting by screwing burner counter-clockwise
onto fitting.
NOTE: Do not over-tighten the male fitting as the air shutter
needs to move freely in order to adjust air intake.
Check the attachment for proper connection every
time propane tank is connected to fryer.
Air Shutter
Male
Fitting
Step 2
Remove nut from bottom of burner assembly.
Step 3
Position the stand upside down as shown.
Step 4
Place burner assembly inside stand with threaded bolt
protruding through
support strap as shown.
Step 5
Place Heat Shield on
support strap with
threaded bolt protruding
through center hole.
Step 6
Thread nut onto bolt
and securely tighten. Do
not overtighten.
Step 7
Set fryer with burner assembly upright on flat surface.
Make sure burner assembly is securely attached to fryer.
PROCEED TO "GAS LEAK TESTING" SECTION ON PAGE 8.
Burner
Air Hole
Spring
14