Advertisement
Quick Links
Advertisement
Related Manuals for Milwaukee M12 FDGA
Summary of Contents for Milwaukee M12 FDGA
- Page 1 M12 FDGA M12 FDGA Original instructions...
- Page 2 M12 FDGA M12 FDGA Original instructions Alkuperäiset ohjeet Algupärane kasutusjuhend Originalbetriebsanleitung Πρωτότυπο οδηγιών χρήσης Оригинальное руководство Notice originale Orijinal işletme talimatı по эксплуатации Istruzioni originali Původním návodem k používání Оригинално ръководство за Manual original Pôvodný návod na použitie експлоатация Instrucţiuni de folosire originale Manual original Instrukcją...
- Page 3 15.000 10.000 20.000 24.500 Technical Data,Safety Instructions, Speci ed Conditions of Use, Declaration of Conformity, Batteries, Maintenance, Symbols Please read and save these instructions!
- Page 4 = min. 10 mm ø 6 mm...
- Page 5 ø 8 mm...
- Page 7 15.000 10.000 20.000 24.500 n ≤ n max. MODE n (min 0-10 000 0-15 000 0-20 000 0-24 500 15.000 10.000 20.000 15.000 24.500 10.000 20.000 24.500 15.000 15.000 20.000 10.000 20.000 10.000 24.500 24.500 15.000 15.000 20.000 20.000 10.000 10.000 24.500 24.500...
- Page 8 Start 2 sec...
- Page 9 Load-dependent motor protection: If the motor is overloaded, the overload protection will trip. To continue working, switch the machine o and then on again. If the battery becomes too hot, the fuel gauge lights will ash in an alternating pattern and the tool will not run. Allow the battery to cool down.
-
Page 11: Technical Data
TECHNICAL DATA M12 FDGA Fuel angled die grinder Production code 4745 52 02..000001-999999 Battery voltage 12 V Rated speed 1 / 2 / 3 / 4 0-10000 / 0-15000 / 0-20000 / 0-24500 min Collet diameter 6,0 mm Collet diameter 8,0 mm Abrasive grinding body diameter max. - Page 12 g) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory.
- Page 13 Kickback and Related Warnings e) When wheel is binding or when interrupting a cut for any reason, switch o the power tool and hold the power tool Kickback is a sudden reaction to a pinched or snagged rotating motionless until the wheel comes to a complete stop. Never wheel, backing pad, brush or any other accessory.
-
Page 14: Specified Conditions Of Use
Do not dispose of used battery packs in the household refuse or Determine the composition of the workpiece before beginning by burning them. Milwaukee Distributors o er to retrieve old work. Asbestos should only be removed by a quali ed professional. -
Page 15: Maintenance
Use only Milwaukee accessories and Milwaukee spare parts. Should machine. components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of Always wear goggles when using the machine. guarantee/service addresses). - Page 16 Copyright 2020 Techtronic Industries GmbH Techtronic Industries (UK) Ltd Max-Eyth-Straße 10 Fieldhouse Lane 71364 Winnenden Marlow Bucks SL7 1HZ Germany +49 (0) 7195-12-0 (11.20) www.milwaukeetool.eu 4100 4255 01...