Siemens SIMATIC Equipment Manual page 34

Article number
Interrupts/diagnostics/status information
Alarms
•
•
•
Diagnoses
•
•
•
•
Diagnostics indication LED
•
•
•
•
•
•
Potential separation
between the load voltages
between Ethernet and electronics
Potential separation channels
•
•
Isolation
tested with
•
•
Standards, approvals, certificates
Suitable for safety-related tripping of standard
modules
Highest safety class achievable for safety-
related tripping of standard modules
•
•
•
I/O device digital inputs DI 16x24VDC M12-L 8xM12 (6ES7141-6BH00-0BB0)
Equipment Manual, 06/2021, A5E46570510-AB
Diagnostic alarm
Maintenance interrupt
Hardware interrupt
Diagnostic information readable
Monitoring the supply voltage
–
parameterizable
Wire-break
Short-circuit encoder supply
RUN LED
ERROR LED
MAINT LED
Channel status display
for channel diagnostics
Connection display LINK TX/RX
between the channels
between the channels and the power supply
of the electronics
24 V DC circuits
Test voltage for interface, rms value [Vrms]
Performance level according to ISO 13849-1
Category according to ISO 13849-1
SILCL according to IEC 62061
Technical specifications
6ES7141-6BH00-0BB0
Yes; Parameterizable
Yes; Parameterizable
Yes; Parameterizable
Yes
Yes
Yes
Yes; DI, input current < 0.3 mA, per channel
Yes; Per channel group
Yes; green LED
Yes; red LED
Yes; Yellow LED
Yes; green LED
Yes; red LED
Yes; green LED, only link
Yes
Yes
No
No
707 V DC (type test)
1 500 V; According to IEEE 802.3
Yes; From FS01
PL d
Cat. 3
SILCL 2
33