Wiring The Channels; Available Channels; Access The Wiring Channels - Emerson Micro Motion 5700 Installation Manual

Installation Manual
MMI-20029969
4

Wiring the channels

4.1

Available channels

Signal Channel A
Channel F
OUNDATION
options or FISCO "ic")
Signal Channel A
Channel F
OUNDATION
options
4.2

Access the wiring channels

Procedure
1. Remove the wiring access cover to reveal the I/O wiring terminal block connectors.
2. Confirm which transmitter channels are activated, or ON, and identify the type of
3. Record the channel and wiring configuration on the label provided inside the
Installation Manual
Channel C
fieldbus (FISCO "ia" IS mA Output
Channel C
fieldbus mA Output
configuration you will be wiring to based on the options available.
Figure 4-1: Activated channel identification
transmitter housing cover.
Wiring the channels
February 2020
Channel D
IS Frequency Output
IS Discrete Output
Channel D
Frequency Output
Discrete Output
23