How To Activate Screen Lock; How To Adjust Lcd Brightness; How To Change The Keyboard Layout - GE Voluson i BT06 Service Manual

GE
D KTI106052, R
IRECTION
3-8-1-5

How to activate Screen Lock

Select the
1.) Check mark "Screen Lock".
a.) If no password previously entered, the following dialog appears.
b.) Enter "New Password".
NOTE: A new screen lock password must be at least 6 characters long and has a maximum length of 80
characters. The password must contain at least 2 non-letter characters, 0...9 or !@#$%^*().
c.) "Retype new Password" and then click SAVE&EXIT to save new screen lock password.
2.) Click SAVE&EXIT to save Settings and exit System Setup.
Status of the Screen Lock is shown in the menu area of the "Utilities" menu. I
The Screen Lock password cannot be reset by the user!
NOTICE
!! NOTICE:
3-8-1-6

How to adjust LCD Brightness

see: Chapter 6 - LCD Brightness on page
3-8-1-7

How to change the Keyboard Layout

see: Chapter 6 - Setup the Voluson i / Voluson e Keyboard Language Layout on page
10
EVISION
page in the System Setup see:
GENERAL
Figure 3-124 Screenlock Password
Figure 3-125 Screen Lock status - shown in "Utilities" menu
Chapter 3 - Setup Instructions
Figure 3-122.
Screen Lock "hooked" in System Setup
to change current Password
only available if "Emergency Mode" is activated
6-3.
V i / V e
OLUSON OLUSON
S M
ERVICE ANUAL
6-10.
3-101