Husqvarna S 13 Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Vacuum Cleaner
  5. S 13
  6. Manual

Husqvarna S 13 Manual

Hide thumbs Also See for S 13:
Table of Contents

Advertisement

Quick Links

Introduction................................................................... 15
Safety............................................................................18
Assembly...................................................................... 19
Operation...................................................................... 20
Maintenance................................................................. 22
Product description
The product is a single phase dust extractor. Dust-laden
air goes through the suction hose into the inlet valve.
The product separates the dust particles from the air.
The particles falls into the plastic bag at the bottom of
the product.
Product overview S 13
2
1
4
5
6
7
1. Pre-filter
2. Jet Pulse Handle
3. HEPA-Filter
4. Hose lock
Contents
Troubleshooting............................................................ 23
Transportation, storage and disposal........................... 24
Technical data.............................................................. 24
EC Declaration of Conformity....................................... 26

Introduction

Intended use
This machine is designed for vacuuming and separating
dry, non-combustible dust with an explosion limit value
of >0.1mg/m
This machine is intended for commercial use, for
example in hotels, schools, hospitals, factories, shops,
offices and rental businesses.
3
5. Inlet plug
6. Longopac connection
7. Longopac holder
8. Manometer
3
. Do not use the product for other tasks.
8
11
10
9
1
0
Auto
1

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna S 13

Summary of Contents for Husqvarna S 13

  • Page 1: Table Of Contents

    The particles falls into the plastic bag at the bottom of This machine is intended for commercial use, for the product. example in hotels, schools, hospitals, factories, shops, offices and rental businesses. Product overview S 13 Auto 1. Pre-filter 5. Inlet plug 2. Jet Pulse Handle 6.
  • Page 2 9. ON/OFF 11. Auxiliary outlet for power tools (Only 220-230V) 10. Toggle fastener Product overview S 26 1. Pre-filter 7. Longopac holder 2. Jet Pulse Handle 8. Hour meter 3. HEPA-Filter 9. Manometer 4. Hose lock 10. ON/OFF 5. Inlet plug 11.
  • Page 3 Product overview S 36 1. Pre-filter 2. Jet Pulse Handle 3. HEPA-Filter Always use approved ear protection. 4. Hose lock 5. Inlet plug 6. Longopac connection 7. Longopac holder Always use approved eye protection. 8. Hour meter 9. ON/OFF 10. Manometer VARNINGI Denna utrustning WARNING! This appliance contains...

  • Page 4: Safety

    Product liability • the product has an accessory that is not from the manufacturer or not approved by the manufacturer. As referred to in the product liability laws, we are not • the product is not repaired at an approved service liable for damages that our product causes if: center or by an approved authority.

  • Page 5: Assembly

    water. Make sure it is repaired by a qualified person • Keep hair, loose clothing, fingers and all parts of to avoid hazard. body away from openings and moving parts. • Regularly inspect cord and plug for damage. Do not •...

  • Page 6: Operation

    • Multi adapter (only S 13/S 26) There is a hose intake with a hose lock on the product. The hose lock makes sure that the suction hose adapter If 1 of the parts is missing, speak to your local service do not fall off.
  • Page 7 To assemble a new Longopac dust bag 4. Tighten a strap around the bag and the container to secure the bag to the container. WARNING: Always clean the prefilter before change of bag collection system. Note: The dust extractor has Longopac system. 1.

  • Page 8: Maintenance

    1. While running the dust extractor, seal the inlet using 3. Repeat step 2 five times. It is important to let the the inlet plug or the inlet valve. Staubabsauger rebuild the vacuum in between every repetition. 2. Let the Staubabsauger build up vacuum for 5 seconds, then quickly push and hold down the Jet 4.

  • Page 9: Troubleshooting

    • All parts that are contaminated after service work Note: Recommended intervals for filter change: Pre-filter must be disposed in a correct procedure in plastic every 6 months and HEPA filters every 12 months. bags. Refer to local regulations. • Use correct personal equipment when you clean the 1.

  • Page 10: Transportation, Storage And Disposal

    Storage of the product • The product must be stored inside away from outdoor elements. Technical data Technical data Data S 13 [220 - S 26 [220 - S 36 [220 - S 13 [110 - S 26 [110 - 230V] 230V]...
  • Page 11 Data S 13 [220 - S 26 [220 - S 36 [220 - S 13 [110 - S 26 [110 - 230V] 230V] 230V] 120V] 120V] Power (max), kW (HP) 1.2 (1.6) 2.4 (3.2) 3.6 (4.8) 1.2 (1.6) 2.4 (3.2) Current (max), A Airflow (max), m³/h...

  • Page 12: Ec Declaration Of Conformity

    EC Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE 561 82 Huskvarna, Sweden, Tel.: +46 36146500 declare on our sole responsibility that the product: Description Dust Extractors Brand HUSQVARNA Type / Model S 13, S 26, S 36...

This manual is also suitable for:

S 26S 36

Table of Contents