Connecting The Com Connecting Cable To The 3Rw5 Communication Module - Siemens SIRIUS 3RW5 Equipment Manual

5.1.2

Connecting the COM connecting cable to the 3RW5 communication module

Requirements
● 3RW5 communication module mounted on a level surface (Page 45)
● Removed cover cap
Loosen and remove the securing mechanism of the cover cap and keep the cover cap in
a safe place.
● 3RW50 soft starter with connected COM connecting cable (accessory) (Page 49)
NOTICE
Damage to property due to electrical voltage
Switch off the power to the 3RW5 soft starter before starting work
(main and control supply voltage).
Procedure
NOTICE
Material damage due to incorrect plug-in connection
Use the front plug-in connection of the 3RW5 communication module. The rear plug-in
connection is not suitable for connecting to the COM connecting cable.
Illustration similar
SIRIUS 3RW5 EtherNet/IP communication module
Equipment Manual, 03/2020, A5E45131885002A/RS-AB/002
Connection
5.1 COM connecting cable
51