Related Manuals for Benassi MC2300 Reverso
Summary of Contents for Benassi MC2300 Reverso
- Page 1 S.p.A. INSTRUCTIONS MAINTENANCE MANUAL MC 2300 MC 2300 MC 2300 MC 2300 “REVERSO” 24/04/1999...
-
Page 2: Service And Warranty
14) End of the work 15) Use of the machine-Milling unit reversibility 16) Maintenance and machine lubrication 17) Garaging 18) Troubleshooting 19) Rules for a correct use of the machine 20) Accident-prevention rules 21) CE Declaration of the machine MC 2300... - Page 3 • Dry air-filter. • Oil quantity in the engine 0,6 l. • Working with standard car petrol 90/100 octanes ron. Diesel fuel MC 2300 D. • Cone clutch in oil bath with lined hub for all versions. 3- CHARACTERISTICS AND DRIVES CAPTIONS The machine is an engine driven cultivator.
-
Page 4: Packing And Transport
Fill the engine with oil SAE 20-40 up to the mark on the oil dipstick, about 0,6 l. ( SAE 20 f or low temperatures, SAE 40 for warm climates). d) Assemble the accessories (see Picture 3 accessories). MC 2300 Engine driven cultivator version Power mower version... -
Page 5: Machine Identification
Any alterations made on the machine excludes responsibility byside of the BENASSI SPA f or the resulting damages. 6 -ACCESSORIES 38-48 Picture 3 9 –USE OF THE MACHINE MC 2300 Wheels torque 3.50.6 Cod. 97063300 Wheels torque 13.500.6 Cod. 97063400 Plough Cod. - Page 6 To pass from the Power mower version to the Culti vator version proc eed in the s ame way, turni ng clockwise the steering column. Put the safety loc ki ng rod for reverse gear again, (Ref. “A” Picture 8). 10 – DRIVES DESCRIPTION MC 2300...
-
Page 7: Machine Starting
The princi pal us es of the mac hine are: Cultivator version (See Picture 2); Power mower version (See Picture 2a). 12 MACHINE STARTING 13 – START OF THE WORK 14 – END OF THE WORK MC 2300 Picture 9... -
Page 8: Maintenance And Lubrication
Periodicall y is needed to control bl adehol ders (Ref. “B” Picture 12) s o that the blade has not too much freeplay or is fastened too tight. If the c utting of the grass after the adjustments is not s atisfying, the blade needs to be grinded or changed. MC 2300... -
Page 9: Troubleshooting
! Never wor k in slopi ng grounds without havi ng assured the machi ne stability. Attention! Do not wor k in grounds with a more than 50 % slope. ! Keep the fuel i n proper tanks . 17 -GARAGING 18 - TROUBLESHOOTING MC 2300... - Page 10 Handlebar vibration with ISO.5349 assess ment val ue 19,6 m/s ec 2 40010 S. MATTEO DELLA DECIMA (BO) - ITAL Y TEL. 0039/051/82.05.34 TYPE ENGINE DRIVEN CULTIVATOR RESULT AND TEST S MODEL MC 2300 “REVERSO” VIA LAMPEDUSA 1 TELEFAX 0039/051/682.61.64 Retailer stamp MC 2300 MODEL MC 2300 S.