45 RPM Adapter Safety & Warranty Manual Support For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit numark.com. For additional product support, visit numark.com/support. Connection Diagram Items not listed under Introduction >...
Page 3
Note: When NTX1000 is connected to a computer via USB, the Phono/Line switch must be set to Line. Top Panel 1.
Page 4
Note: To prevent damage, we recommend removing the headshell and cartridge assembly before packing or transporting NTX1000. 15. Tonearm Clip: Close this clip to secure the tonearm while it is not being used. The clip remains in the “up” position while open.
Page 5
Setup Platter Place the platter onto the motor by aligning the pins in the bottom of the platter with the holes in the motor. Press it down firmly. Check to make sure that it rotates uniformly and does not wobble excessively, and then place the slipmat onto the platter.