Audiovox Pursuit PRO-OE2 Programming Manual

TRANSMITTER PROGRAMMING GUIDE
The transmitters included with the system have been pre-programmed
at the factory, with each button pre-assigned to control a specific function
of the system. Although the system in the vehicle has either a 2 or 3
channel receiver, depending on the model, the transmitters included with
the system are capable of transmitting 3 distinct signals. This allows you
to program each transmitter to more than one vehicle in two car families,
and also allows you to change which button(s) control certain functions
of the system.
( Example: Transmitter channel 3 can be programmed to activate
Receiver channel 2. ) Refer to the chart below for access to each of the
transmitter channels, and for the standard factory button assignments.
TRANSMITTER
CHANNEL BUTTONS
1 LOCK
UNLOCK
2 OPTION
3 LOCK
UNLOCK
& OPTION
Some of the more common accessories for these additional
channels are;
*AS 9154
*AS 9075
*AS 9153
*AS 9256
** Only Available With Some Systems
Model : PRO-OE2
SYSTEMRECEIVER
CHANNEL FUNCTION
1 Remote Lock & Unlock
& or **Remote Arm/Disarm
**Remote Emergency Panic
2 * Pulsed Output for Accessories
3 * Switched Output for Accessories
* Second Vehicle Control
Remote Garage Door Interface
Remote car starter
Remote window roll up
Remote trunk release relay