Network - D-Link DNR-4020-16P User Manual

Section 3 - Configuration
IP Address
This page lets you configure the NVR's connection to the Internet or local network.
Select this connection if you have a DHCP server running
Enable DHCP
on your network and would like a dynamic IP address to be
Client
automatically updated to your NVR.
You may obtain a static or fixed IP address and other network
information from your network administrator. A static IP address
will simplify access to your NVR in the future.
Enter the fixed IP address of the NVR. This is used to access the
IP Address
web interface. If the NVR does not receive its address from a
DHCP server, then its default IP address is will be 192.168.0.20.
Set this to match the subnet mask of the provided IP address.
Subnet Mask
The default value is 255.255.255.0.
Set this to the default gateway on your router or local subnet for
Default
proper network routing.
Gateway
Toggle this to enable DNS automatically.
Obtain DNS
Automatically
Primary domain name server that translates names to IP addresses.
Preferred DNS
Server
Secondary domain name server to back up the primary domain
Alternate DNS
name server
Server
D-Link DNR-4020-16P User Manual

Network

Network
45