Section 3 - Configuration
On this page you can enable an alarm to trigger when video loss occurs.
Select the channel to configure.
Channel
Toggle this to cause video loss to trigger an alarm.
Enable Video
Loss
Select the event(s) the alarm should trigger from the following
Event Actions
list:
•
Email: Send an email notification
•
Buzzer: Trigger a buzzer sound
•
Popup Message: Display a notification in a popup window
Trigger a notification on the Alarm Out interface(s).
Enable Alarm
Out
Toggle to keep a record of alarm events.
Enable Event
Recording
Enable or disable the alarm according to a particular schedule.
Detection
Schedule
D-Link DNR-4020-16P User Manual
Video Loss
41