RH-10
Troubleshooting
should be in local mode. When in local mode, the phone's software is not running, and it
will not search for a pilot.
To switch between normal and local modes, use the "Phone Control" dialog box, shown
here. This setting will be lost if the phone is powered down.
Baseband Test Tone for AMPS Transmitter Tests
To add a baseband test tone to the AMPS transmitter, open the "RF Test Tone" dialog box,
shown here, and set the parameters as desired.
Page 36
Nokia Corporation
CCS Technical Documentation
Confidential
Issue 1 09/2002