Setting The Refresh Rate For Your External Monitor; Connecting Usb Devices - Fujitsu M1010 Manual

Setting the refresh rate for your external
monitor
If the refresh rate set is too high, the
monitor may be damaged. Please see the
documentation included with your monitor
for the maximum possible refresh rate.
By setting the optimum refresh rate you will
avoid screen flicker.
Set the appropriate refresh rate for the type of
•
monitor connected.
Select Startsymbol – (Settings) – Control
•
Panel – Appearance and Personalization –
Personalization: Adjust screen resolution.
or
Right-click
•
Personalization – Display Settings, choose
screentype 1 or 2.
Select Advanced Settings – Monitor.
•
Select Screen Refresh Rate to choose the
•
optimum refresh rate for the connected
monitor type.
Click Apply and OK.
•
7_AmiloMini_M1010_P24-26_EN.indd 25
on the desktop.
C onnecti ng Ex ternal Dev ic es

Connecting USB devices

On the USB ports you can connect external
devices that also have a USB port (e.g. a printer,
a scanner or a modem).
USB devices are hot-pluggable. This
means you can connect and disconnect
devices while your operating system is
running. USB 1.x has a maximum data
transfer rate of 12 Mbit/s. USB 2.x has a
data transfer rate of up to 480 Mbit/s.
Additional information can be found in the
documentation for the USB devices.
Under
Connect the data cable to the external
•
device.
Connect the data cable to a USB port of the
•
notebook.
Device drivers
USB devices
recognised and installed by your operating
system.
will be automatically
25
9/8/08 1:20:12 PM