Redial; Call Mute And Un-Mute; Call Hold And Resume; Call Transfer - Yealink SIP-T54W Quick Start Manual

COGECO BUSINESS | YEALINK SIP-T54W GIGABIT COLOUR IP PHONE

Redial

Call Mute and
Un-Mute
Call Hold and
Resume

Call Transfer

• Press to enter the Placed Call list, press
desired entry, and then press
• Press twice when the phone is idle to dial out the last dialed number.
• Press to mute the microphone during a call.
• Press again to un-mute the call.
To place a call on hold:
Press or the Hold soft key
during an active call.
You can transfer a call in the following ways:
Blind Transfer
1. Press or the Transfer soft key
during an active call. The call is placed
on hold.
2. Enter the number you want to
transfer to.
3. Press or the Transfer soft key.
or to select the
or the Send soft key.
To resume the call, do one of
the following:
If there is only one call on hold, press
or the Resume soft key.
If there is more than one call on
hold, press or
desired call, and then press
the Resume soft key.
Semi-Attended Transfer
1. Press or the Transfer soft key
during an active call. The call is placed
on hold.
2. Enter the number you want to
transfer to, and then press
3. Press or the Transfer soft key
when you hear the ring-back tone.
4
to select the
or
.