Advertisement
AOS-44
Operations
Manual
CAMERA
(;OMPONENTS
AND CONTROLS
Cam~ra:
Se,j page 12
1.
Microphone -Wat~rprool
microphone lor audio pickup.
2.
Mirror!Normal
switch -Wat~(proof
switch to change t8mera in18ge from a mirror view (rear of vehicle
mounted) to normal view (~ide or fron1 mounted camera) See Figure 7.
AFFIXING DISTANCE
MARKERS
TO THE MONITOR SCREEN
1
2
3.
4
Clean mol1itor screen surface of fingerprints
Set the camera into the "DOWN"
position
Place
distance indic.to~
behind the vehicle at (3) feet, (6) feel and (9) feet along Ihe width of thEJ vehicle. These distanc&s are measured
from the rear bumper
(Refer to figure 8)
Attach the markers to the moni\or screen over the images of the distance indicators.
These ",art;.e~
fe?f~l\t
a
distance of (3) feel. (6) feel. end (9) leef from the back of the vehicle
(See Fig 8).
Affix the "STOP" marker on Ihe monit{)r screen over the image of the rear bumper to locate the rear bumper
The mo"itoT s~Teen is now "ca\ibTa\ed" tor dis\ances behind the vehicle of (3) feel, {6) feet and (9) feel
-Page4ofI4-
FUNCTIONS
AND OPERAnON,
CONnNUED
Rear of Monitor
see page' ,
1 Power connecUon
Pi" 1
not used
Pin 2
Ground. black wire
Pin 3
Reverse circuit -blue wire
Pin 4
not u.ed
Pin 5
not used
Pin 6
+12VDC ignition-red
wire
2 Camera A input
conne~on
to camera extension cable
3 Camera B input
connection
10 additional camera e~ension
cable
4 External speaker connection
center pin is positive audio output
used to disable the internal speaker and
femotely mount a s~aker
(or driver convenience.
Advertisement
