Baofeng UV5RA Programming Manual page 4

accidently transmit you will be heard on that frequency (police, weather, taxi, fire, etc.) The
way to avoid this is to use the programing software and enter a transmit frequency of
000.000 MHz). We have not found a way of entering 000.000 in the manual programing
mode.
Additional Menu choices that may be of interest
All of these modes are accessed by pressing the
keys to get to the menu item then pressing the
entering data to make choices.
Menu # Function
SQL
# 0 Set Squelch threshold (0 is no squelch 9 is max squelch))
STEP
Tuning step size using the 65up down arrow keys
# 1
TXP
# 2 Set transmit power (High or Low)
SAVE
# 3 Battery Save Mode (Off or 1,2,3 or 4 Hours)
VOX
# 4 (ON or OFF and sensitivity)
Wide or Narrow Bandwidth (5 KHz or 2½ KHz)
WN
# 5
ABR
# 6 Display illumination (Off or 1 to 10 Seconds)
TDR
# 7 Dual watch (on, A or B)
BEEP
# 8 Tone on key stroke (ON or OFF)
TOT
# 9 Transmitter On Time, in seconds
RCTCS
Receive CTCSS (set tone or off with the 65up down arrow keys)
# 11
TCTCS
Transmit CTCSS (off or select tone with the 65up down arrow keys)
# 13
VOICE
#14 Select language (English or Chinese)
PTT-ID
# 19 (Off, BOT, EOT, BOTH)
PTT-LT
# 20 Delay PTT for coding (0 to 50 ms)
BCL
# 23 Busy Channel Lockout (on or off)
AUTOLK
# 24 Automatic Keyboard Lock (on or Off)
SFT-D
# 25 Repeater Offset (+,-, off)
OFFSET
# 26 Repeater Offset Frequency
MEM-CH
# 27 Memory Channel number entry
DEL-CH
# 28 Delete Channel number entry
BAND
#33 Band select VHF or UHF (same as BAND button)
TDR
# 34 Dual watch (on, A or B)
RODGER
#39 places tone at end of transmission (On or Off)
RESET ALL
# 40
Rev Final
Restores default settings (use with caution, your stored data will
be lost)
MENU
key then using the 65up down arrow
MENU
key and the 65up down arrow keys or
1/9/2104 AD7FO, AE7RJ, KE7RAP