Baofeng UV5RA Programming Manual page 3
Dual band transceiver
Hide thumbs
Also See for UV5RA:
- Quick start manual (8 pages) ,
- Programming manual (2 pages) ,
- Operating manual (24 pages)
Advertisement
18. Press the
MENU
14) the radio announce
19. Press the
EXIT
20. Press the
MENU
set the CTCSS Tone if used.
21. Press the
MENU
T CTCSS
. Use the keypad to select the desired CTCSS tone (i.e. 100, 123, 141, etc.)
22. Press the
MENU
the radio announce
23. Press the
EXIT
24. This procedure will store the frequency entered above along with the above settings.
25. Press the
MENU
26. Press the
MENU
an empty channel number location.
27. Press the
MENU
28. Press the
EXIT
ENTERING AND STORING THE TRANSMIT FREQUENCY
*
29. Press the
KEY.
frequency + or
30. Press the
MENU
31. Press the
MENU
32. Press the
MENU
33. Press the
EXIT
34. Press the
* KEY
If you are entering additional frequencies go back to step 2, skipping steps
that are the same as the previous entry (power, offset, offset frequency, etc.)
35. Press the
MENU
36. Press the
MENU
the channel number to be deleted.
37. Press the
MENU
38. Press the
EXIT
======================================================================
Keep in mind that you can program frequencies that are illegal to use with your amateur
radio privileges. This radio does not inhibit transmitting on these frequencies so if you
Rev Final
again to lock in your selection If you have voice turned on (Menu item
confirmed
.
key to leave the menu system.
SETTING THE CTCSS TONE
key and use the 65up down arrow keys to get to menu item #13 to
If you have voice turned on (Menu item 14) the radio will respond with
again to lock in your selection If you have voice turned on (Menu #14)
confirmed
.
key to leave the menu system.
STORING THE FREQUENCY
and use the 65up down arrow keys to get to menu # 27 MEM-CH
the radio will announce
the radio will announce
key to leave the menu system.
The display will show the transmit frequency (previously entered
or the offset set above or (no offset))
key
key the radio will announce
key again and the radio will announce
key to leave the menu system.
to exit the reverse mode.
Deleting a memory location
and use the 65up down arrow keys to get to menu #28 DEL-CH
The voice will announce
the radio will announce
key to leave the menu system.
1/9/2104
memory channel
. Use the keyboard to enter
receiving memory
Channel number
.
Transmitting memory
Delete Memory
. Use the keyboard to enter
Confirm
.
AD7FO, AE7RJ, KE7RAP
Advertisement
