Audiovox CTX3600A User Manual page 6

t.
* " "
"
3:'t'c;
~
Example
key ~ then ~.
Press ;RCfi
Note: If there is no vacant address in the assigned
are~ the phone number will not be stored in
the memory.
Secret Memory
This feature allows you to store ID codes, telephone
credit card numbers, etc. in secret memory locations.
For security purposes, you must enter your three-digit
security code to display the secret number. For
practical use of the secret memory, refer to "END- TO-
END SIGNALING".
To Store tlle Secret Number
1. Press ~ , then enter Secret Number.
2. Press m , ~, then enter the ~~mo:ry
address (01 through 99).
will be displayed on
ereaou
Example: To store the secret number 9876 into
memory address 41 or automatically store this
number into a vacant memory address of 40's.
or
press keys ~ , [I] .(to store into a vacant
memory address of 40'
To Confirm the Secret Number
1. Enter the three-digit security code.
2. Press ~, then enter the memory address (01
through 99). The last 10 digits of the secret
number will be displayed on the readout
Example: To confinn the secret number stored into
memory address 41.
To Lock the Unit
Pres then key ~ (LOCK).
The indicator lights. The unit will remain
locke un unlocked, even if the power is turned
off.
Automatic Lock (NAM Option)
If you request the feature of Automatic Lock, your
NAM can be programmed so that your unit will
automatically go into the lock mode when the power
of the unit is turned "off". When ~is turned "on':
the unlock code is required to operate the unit.
To Unlock the Unit
Enter the three-digit unlock code. The ~
indicator will go out when the three-digit code is the
same as the code registered in the NAM.
Backlighting On/Off Control
LCD display and the keypad are backlit automatically
after the Power-On. If needed, backlighting can be
turned off by pressing ~ ' key ~ then 00 .
Even if the unit is in the backlighting "Off" mode, the
backlighting will be turned on again automatically for
10 seconds when any key operation is performed or a
call is received.
To return to the backlighting "On" mode, press ~ ,
key ~ then 00 again.
Volume Control
The audio level of the loudspeaker, earpiece and the
alert tone can be adjusted by the Volume Control keys
(~and~).
1. Enter the three-digit security code
~~~
~~~
~